Product Description
Load Roller Assy,3 inch Diameter Tread: Heavy-Duty Poly, Hub: Steel
Our load rollers are made from a high grade poly-urethane. These wheels are non-marking and are designed for indoor and outdoor use. The wheels come with steel hubs and are loaded with (2) 6204-2RS bearings. These rollers have a very quiet operation, and are beveled to reduce coning and even out wear. Listing is for one wheel assembly. Long lasting material will withstand even the toughest conditions. Very durable and easy to install. Designed specifically the Multiton TM inch Tandem inch (2 wheels per fork).
Compatibility: Fits pallet jacks made by Multiton, model TM J. SKU: MU 90332-A
Specifications
Physical Specifications
| Hub Material | Steel |
Material & Construction
| Tread Material | Polyurethane, Shore A durometer 70D |
| Bearing Specification | Two 6204-2RS sealed ball bearings per roller |
| Operating Surface Compatibility | Designed for indoor and outdoor applications |
| Performance Characteristics | Non-marking, beveled tread, quiet operation, reduced coning and wear |
Part Numbers
| Direct Replacement Part Number | MU 90332-A |
| Cross-Reference Part Numbers | Equivalent to RL WHL-5013-TPTUM (Rol-Lift), UE H-1043-WHKIT (Uline) |
| Quantity per Set | One (1) roller assembly; two required per pallet jack fork |
Maintenance & Lifespan
| Typical Service Life | 2000-6000 operating hours under normal conditions |
| Inspection Points | Check regularly for flat spots, cracks, bearing noise, and tread wear |
Frequently Asked Questions
Q: What is the tread diameter of the 0000-72008 load roller?
A: This load roller features a tread, providing standard compatibility with most Multiton manual pallet jack models.
Q: What materials comprise this load roller construction?
A: The roller combines a heavy-duty polyurethane tread (Shore A durometer 70D) with a steel hub. The polyurethane provides non-marking performance and durability for both indoor and outdoor material handling environments.
Q: What bearing specification does this load roller use?
A: This roller is loaded with two 6204-2RS sealed ball bearings. The 2RS designation indicates rubber seals on both bearing races to exclude dirt and moisture, ensuring smooth and quiet operation under typical manual pallet jack duty cycles.
Q: Are there equivalent or cross-reference part numbers available?
A: This load roller is equivalent to RL WHL-5013-TPTUM from Rol-Lift and UE H-1043-WHKIT from Uline. These part numbers represent comparable rollers with similar dimensions and specifications.
Q: How long does this load roller typically last under normal use?
A: Service life depends on floor conditions, load patterns, and maintenance practices. The polyurethane tread and sealed bearings typically deliver operating hours. Inspect regularly for flat spots, cracks, or bearing noise, and replace when tread wear exceeds safe limits.
Q: How should I store load rollers when not in use?
A: Store rollers in a dry, climate-controlled environment away from direct sunlight, extreme heat, or ozone-producing equipment. Keep away from oils, solvents, and corrosive substances. Store in an upright position to prevent flat-spotting.
Q: Can this load roller be reused after replacement?
A: Load rollers can often be refurbished and reused if they are not severely damaged. Inspect for bearing play, tread separation, or structural cracks. Worn tread can sometimes be restored through retreading services available from specialty suppliers.
Q: How do I identify when a load roller needs replacement?
A: Replace the roller when tread wear becomes uneven or excessive, when flat spots appear, when the roller no longer tracks straight, or when bearing noise indicates internal wear. A roller should also be replaced if the tread separates from the hub or if visible cracks develop.
